см. тж. во время; встречающийся ~; по мере; после
• I (?, ?)[sub]200[/sub] is the intensity of the 200 reflection at a given ? and ?.
• The engine develops 340 hp at 1900 rpm.
• For a given centre distance, the length of a crossed belt will be a constant.
• In starting up, the starter should be set at ...
• Certain precautions must be taken to obtain satisfactory results in using this equipment.
• On ignition the ingredients must vaporize.
• On interruption of the electric current the valve closes instantly.
• The temperature is read (up)on entering and leaving the water jacket.
• Bentonite shrinks upon drying.
• When added to aluminium, germanium produces a better hardening effect than silicon.
• When employing these compounds as fuel additives, we ...
• When tuning a system for optimum performance one must ...
• With an overall length of 18 ft the machine weighs 15 tons.
• The compressor operates with one suction valve open.
• Both shot core drilling and rotary drilling methods are used in shaft drilling.
• Given comparable costs for raw materials, the manufacturing cost is determined largely by the weight of the component.
• The breakdown of bias voltage decreases by a few tenths of a millivolt for every °C increase in temperature.
• With the proper combination of resistors and capacitors, the voltage will be ...
• With (or In) this method, the amount of material to be removed can be closely controlled.
• Given the extraordinary resolution of the Space Telescope, it is possible to detect ...
• The conductance increases linearly with the addition of H[sup]+[/sup].
• The lower inertia of the cone clutch elements permits rapid reversal with low energy loss.
• In moving through the tube the atoms collide with ...
• The potential energy is taken as zero for (or as, or with, or when) a > ?, ...
• The equation is useful in comparing diffusion currents from electrodes with different capillary characteristics.
• Neutron stars are apparently born in the explosions of supernovas.
• Such a function is real for real z.